This fact sheet outlines how the BAAJA can unlock American clean energy potential, including by:

• Expanding Transmission Capacity: Expanded transmission projects could enable an estimated 200 GW+ of clean energy development. Ěý
• Removing Gridlocks: The legislation will help move forward clean energy projects, including the 100 GW+ of projects that have been blocked or delayed by permitting and regulatory barriers. Ěý
• Increasing Transfer Capacity: New transmission capacity typically delivers ~1.4x clean energy development — connecting abundant, low-cost American wind and solar resources to the customers that need them.Ěý
• Delivering Wins for American Communities: Unlocked projects could lower consumer prices, build a more reliable grid, and support nearly five million jobs in communities across the country. Ěý

ĚýCheck out the full fact sheet for more information on how the BAAJA could deliver major clean energy wins for the American people. Ěý

The post Unlocking American Energy Potential appeared first on ACP.

The bill provides three principal protections for projects:

• Certainty for projects that already have their federal approvals
• Enforceable deadlines for projects still in permitting
• Significant remedies for systematic disparate treatment of particular project types

It also makes broad changes to:

• Federal transmission siting, planning and cost allocation
• NEPA
• Clean Water Act
• Endangered Species Act
• Historic-preservation review
• Federal-land renewable-energy permitting

Resource uploaded October 5, 2026

The post Summary: Permitting Reform Package appeared first on ACP.

The voluntary guidelines reflect a shared commitment to improving outcomes for both energy development and wildlife conservation and are intended to promote early engagement, informed decision-making, and collaborative problem-solving among solar developers and state fish and wildlife agencies. They cover PV solar project planning through operations and decommissioning, and provide a framework for identifying, avoiding, and reducing potential impacts on wildlife while supporting responsible solar energy development.

The post National Utility Scale Solar Wildlife Guidelines appeared first on ACP.

The difference is clear:

• Faster to build: Â鶹´«Ă˝ projects spent an average of less than a year in development last year, while gas turbines spent two to three years in advanced development and construction.
• Faster to connect: Due to its robust project pipeline, clean power projects take six monthsĚýto two years to connect to the grid, whereas unplanned gas generators can take an average of five to seven years.

Clean energy is keeping our country’s grid stronger and less reliant on slower, costlier sources of energy. To quickly and affordably meet future energy needs, we need to leverage the speed and low cost of clean energy projects.

The post Fact Sheet: Speed to Market appeared first on ACP.

To navigate the challenges of large, multiphase construction efforts, regulatory compliance, and timely site stabilization, Developers must proactively plan, communicate clearly among stakeholders, and strategically design contracts. Intentional stormwater pollution prevention efforts support positive environmental and economic outcomes and strengthen public trust in solar development.

Key themes include:

• Clarifying roles and responsibilities between Developers, contractors, and any relevant third-party stakeholders
• Embedding oversight and enforcement mechanisms into contract language to reduce ambiguity and streamline decision-making
• Anticipating vegetation management needs beyond construction completion to avoid costly delays in permit closure
• Navigating state-specific permit requirements and understanding how they can impact ownership, transferability, and compliance obligations.

By incorporating these considerations early and thoroughly, Developers can reduce risk, improve coordination with contractor partners, and accelerate the path to final stabilization and permit termination.

Resource added 6/23/26

The post Considerations for Stormwater Pollution Prevention appeared first on ACP.

The ballot initiative streamlines the 55-year-old California Environmental Quality Act, shaving an estimated three to seven years from development timelines without sacrificing environmental protections.Ěý

For clean energy, the initiative:

• Sets enforceable timelines for public agencies to complete environmental reviews and issue decisions under the law, addressing delays that eat up years today.
• Sets timelines for judicial review, helping prevent common abuses of CEQA lawsuits to slow projects.
• Eliminates requirements for project developers to evaluate an unlimited number of alternatives to any proposed project, requiring analysis instead of just one alternative and a “no project” scenario.
• Creates objective standards of review, providing that project challenges must be based on written standards such as local ordinances, environmental laws or zoning standards.

The reforms in the initiative, which has qualified to appear on the November ballot, will cut down on bureaucratic delays and help ensure California’s landmark environmental law stays true to its original purpose.

The post Fact Sheet: Building an Affordable California Act appeared first on ACP.

Key elements of BESS emergency preparedness include:

• Pre‑incident planning aligned with NFPA standards, including hazard mitigation analyses, site‑specific emergency access, and coordination with local fire departments.
• Fire and explosion risk analysis informed by UL 9540A testing to establish minimum approach distances and guide responder tactics under worst‑case conditions.
• Emergency planning requirements under NFPA 855, including both an Emergency Operations Plan (EOP) and a comprehensive Emergency Response Plan (ERP) covering preparedness, response, and recovery.
• Ongoing training for facility staff and first responders, with annual refreshers, clear escalation paths, and tabletop exercises to test readiness.
• Post‑incident recovery procedures that address safe equipment removal, waste handling, inspection of unaffected systems, and steps to return facilities to service in accordance with environmental and safety regulations.

Resource added May 5, 2026

The post Emergency Preparedness for Battery Energy Storage Systems appeared first on ACP.

Key elements of hazard mitigation include:

• Identifying risks early during system design so potential issues can be addressed before a facility is built or operated.
• Designing for the specific battery technology, recognizing that different systems have different safety considerations.
• Planning for site‑specific conditions, such as location, layout, weather risks, and emergency access.
• Protecting people on site, with clear safety procedures, training, and appropriate protective equipment.
• Coordinating with emergency responders, so local fire departments and officials understand the facility and response protocols in advance.

Resource added May 5, 2026

The post Hazard Mitigation for Battery Energy Storage Systems appeared first on ACP.

As solar deployment scales, manufacturers are investing in facilities that produce everything from solar modules to mounting structures, electrical equipment, and specialty glass—anchoring a nationwide industrial ecosystem that supports reliable, affordable clean power.

Key highlights:

• 140+ operating solar manufacturing facilities across the U.S., with additional projects under construction and announced.
• 75,000+ American jobs supported, contributing more than $11.5 billion annually to U.S. GDP
• Stronger domestic supply chains for critical components, reducing reliance on imports and improving project delivery.
• Broad economic benefits for U.S. industries, including steel, glass, aluminum, and electrical equipment manufacturing

By producing critical clean energy infrastructure at home, solar manufacturing is reinforcing American industrial leadership while delivering long‑term economic and energy security for communities nationwide.

Resource added 4/30/26

The post Made in America: Onshoring Solar Manufacturing appeared first on ACP.